Thursday, February 3, 2011

Project Management

Project managers can have it tough sometimes.  They are being asked to plan a project, complete with cost and resource estimates, sometimes in an area they are not too familiar with.  On top of the planning, they have to act like an orchestra conductor (Laureate, 2011) to ensure the project progresses forward and success is achieved.  But don't fret, there are some tools and websites that can help you with project estimation, which to me, can be one of the hardest parts of management.

PMI (http://www.pmi.org/), the site for Project Management Institute is where I go first to check for help, advice, and resources on project management.  PMI is the certifying body for PM, and their site contains the Body of Knowledge (BOK) for project managers, professional development section, and knowledge center.  The knowledge center features many articles on a variety of PM topics.  The only downside to this site is some of the articles and areas are restricted access to PMI members only.  But that doesn't mean you can't find great information and help on topics like budget estimation and resource planning.  One of the most helpful and free items to me is BOK.  The BOK often helps me research the proper term that I need help and assistance with.  Because terminology changes from company to company and discipline to discipline, the BOK triggers me with specific words I should include in my searches for help.  If you are lucky enough to have a membership, there are many articles written by SME on cost control, project estimation, and scheduling.  The articles include informative information, white papers, and case studies which have all been reviewed by a panel to ensure they further and advance project management thinking.

All About Project Management (http://managementhelp.org/plan_dec/project/project.htm) is a great resource to have in your back pocket.  The site contains many helpful links for the entire project life-cycle, including agile project management, and is overseen by Kevin Lonergan.  Agile project management is commonly found in IT projects, but more and more aspects of agile PM are making it into mainstream PM.  There are some great agile management concepts that the links talk about such as iterative or spiral development, scrum techniques, and visual controls.  The site not only contains links to other resourceful sites, but also to blogs where you can learn from other project managers.  This site is definitely one you should bookmark, as I find myself coming back to it time and time again because of the consolidation of information.

There are also free templates out there to help with project planning, cost and resource allocations.  Microsoft offers a few good project templates for Microsoft Excel products and you can find them by searching on project and/or planning for business.  For cost estimating, Social Signal (http://www.socialsignal.com/blog/alexandra-samuel/how-create-budget-estimates-proposals-and-project-management) has a great article and tools and templates available for download.  An Excel worksheet, with a pretty comprehensive checklist is also available at the following location:  http://www.exinfm.com/excel%20files/Estimating_Template.xls  I find the strength of this template is the checklists is offers at each stage of the project. 

Overall, there are a ton of resources available on the internet as well as your library to get you through any sticky point of a project.  It is difficult to recommend specific sites because each one is specialized to an area of a project and oftentimes an industry:  budgeting, resource allocation, agile management, getting teams to work together, etc.  Each site and template offers it's own strength - you just have to look for it.

References

Laureate Education, Inc. (Producer). (2011). Communicating with Stakeholders [DVD]. In EDUC 6145. Baltimore, MD.

Thursday, January 20, 2011

Messages Delivered in Various Modalities


Communication and message interpretation changes with each modality it is delivered in.  For this week’s assignment, we were given the same message delivered three different ways:  email, voicemail, and face-to-face (via video).  The message is in regards to obtaining a missing report that is vital to the originator’s task.  Without the report, the originator is unable to perform their work and provide information by the assigned due date.

The first modality explored is email.  In my opinion, the email was wordy, indirect, and didn’t express the urgent need upfront.  The email opens with a statement that the person may be in a meeting or workshop all day and away from their computer.  This statement means email is not the best choice to communicate with them.  The communication continues asking for the report, but not providing a deadline of when the report is needed.  It is only asked if they could provide an ETA on when it will be complete.  If this was my message to someone I would have began with what was needed in the opening statement and provide a date when the information is due by.  Dr. Stolovitch (Laureate Education Inc, 2010) states that the purpose of a communication needs to be mentioned upfront, and in the first sentence or two if possible.  Because it is assumed the recipient has been away from their desk, the email may be more effective as a follow-up to a face-to-face interaction or a voicemail.  If it was a follow-up, I would have stated that the email was a follow-up to the previous communication. 

The second modality explored was a voice message left for the individual.  The message was the best out of the three explored, but could still be improved.  I felt the voice was lacking emotion and a sense of urgency.  While the voice was not monotone, it did lack inflection and came across as being required to call the individual.  The voice sounded bored and not really interested in obtaining the report.  This could be for several reasons, one of those being that the individual with the late report is always late and the voice is accustomed to having to follow-up on the individual.

The last modality presented was a video representing face-to-face communication.  This was my least favorite of all three communication types viewed in this exercise.  The person looked defeated, sounded uninterested, and had non-verbal gestures that could be viewed as inappropriate.  The individual only gestures when speaking about the late report, which could be interpreted as placing blame on the person they are speaking to.  She also looks away when asking for a ETA or if the report could be sent via email.  This tells me she is not comfortable speaking to this person and requesting information.

Overall, while the message in all three scenarios was the same, I felt the voicemail was the most effective in this scenario.  Major improvements could have taken place in all three examples.  In general, the message was not clear, concise, and focused as Dr. Stolovitch (Laureate Education Inc, 2010) suggested it should be.  Each communication should have started with the purpose and intent of the communication, and included specifics as to what was being requested and by when.  Email and voicemail may have been the wrong choices to communicate with if the person has been gone all day.  Depending on the circumstances, voicemail and/or face-to-face would be my primary choice for communication with email as my last choice.  The choice of words is also important in portraying a message.  The choices used in the examples make the requester come across as unsure, defeated, and uninterested in all examples presented.

Research has been performed on effective communication forms as well as leadership and communication styles.  Gluckler & Schrott (2007) have found that face-to-face communication  is the most effective type of communication form among teams when compared to email and mobile email (smartphone).  Voicemail was not included in the study.  Traditional email (sent via desktop computer versus mobile device) was effective in summarizing meetings, decisions, and communicating to a broader audience that included people who were kept up to date on the team's progress.  Mobile email was by far found to be the least effective for communication in a team setting.  Based on this study, as work published by Allen (1977), effectiveness of communication decreases over distance.  After about 30 feet of separation, the message being communicated becomes distorted and loses impact.  F2F communication is recognized as being the strongest, best, and most effective form of communication.  But as an effective communicator, verbal and non-verbal cues still remain an important part of the message.  As previously mentioned, I preferred voicemail over the F2F message provided in this week's case study.  The non-verbal message the person communicated overshadowed what she was trying to accomplish.  In summary, careful thought must be applied to the message, choice of words, non-verbal message, and mode of communication.  Attention should be paid to the background and personality of the person you are communicating with to ensure it will be an effective fit.

References 

Allen, TJ. (1977). Managing the Flow of Technology: Technology Transfer and the Dissemination of Technological Information Within the R&D Organization.  Boston, MA: The MIT Press.

Gluckler, J. and Schrott, G. (2007). Leadership and Performance in Virtual Teams: Exploring Brokerage in Electronic Communication.  International Journal of e-Collaboration, 3(3), 31.

Laureate Education, Inc. (Producer). (2010). Communicating with Stakeholders [DVD]. In EDUC 6145. Baltimore, MD.

Thursday, January 13, 2011

Change Fail!

One of the most important and overlooked project phases is the after-action review or project post-mortem .  If the project was successful, team members are often do not see the value in reviewing the actions and countermeasures taken throughout the project duration.  A project post-mortem will help identify what to keep doing and what strategies, tactics, and processes were beneficial.   If the project wasn’t successful or had many challenges throughout its duration, an analysis provides an opportunity to review what happened, identify warning signs which were missed, and discuss strategies for future use if the problem is encountered again (Greer, 2010).

When projects don’t go as planned, it can be difficult for a team member, sponsor, champion, or project lead to admit there was room for improvement in the approach.  One particular example is a project on developing a waste management system that still has not completed in over 10 months.  As I left the project to pursue other career interests, I had a post-mortem review with several key team members.  Unfortunately, there were no positives discussed that pertained to the project steps or phases.  Several areas of the project were identified as contributing to the problems seen on the project:
  • Lack of definition
  • Scope creep
  • Lack of resources
  • No support
Many of these issues could have been prevented in the beginning stages of the project.  Project management tools were not used, mainly due to the sponsor ’s direction.  The sponsor had his own particular way of running a project, which does not follow traditional project management (PM) principles, which affected the project lead since she was the sponsor's direct report.  There was no project charter, scope, or documentation other than a milestone list.  The only documentation created pertained to waste definitions and measurement systems.  Unfortunately, the project lead was not given responsibility, authority, or accountability and the sponsor dictated what they should do.

The project was severely constrained in terms of potential solutions.  The sponsor, yet again, told the project lead the exact solution he wanted to see, regardless of time, cost, headcount, and employee acceptance.  The primary stakeholders, managers of the area who were to adopt the solution, were highly resistive, but the sponsor ignored their concerns and directed the project lead to "tell them what they will be doing; don't hold their hand; and if they knew what was best for them they wouldn't be in this situation to begin with".

Scope creep was allowed to placate the stakeholders.  Even though the project lead pushed back on many of the changes made, stating that the project can be refined after the initial deliverables were met and providing information on why the changes were not feasible at the current time.  The sponsor, again telling the project lead what to do, allowed the changes because it kept the stakeholders engaged and semi-interested in the project.

Overall, the project should have not been started.  The timing was not right and communication, project planning, and personal/team dynamics harmed the project.  These areas are commonly identified as pitfalls and items to pay attention to to ensure a successful project in literature on change management (Beach, 2006; Portny et al, 2008, Allen & Hardin, 2008).  The project was not ran with a team approach, which caused many issues along the way (Scholtes, Joiner & Streibel, 2001).  Not having a clear, well articulated charter and deliverable that the group agreed upon was also an area that impacted the project (George, 2002).  Most importantly, the project sponsor threatened the project lead to do it his way becasue of the direct reporting relationship.  This made it extremely hard to use any project management tools, offer opinions and advice, and hold people accountable to their decisions.

 
Allen, S., & Hardin, P. C. (2008). Developing instructional technology products using effective project management practices. Journal of Computing in Higher Education, 19(2), 72–97.  

Beach, L.R. (2006).  Leadership and the Art of Change.  Thousand Oaks, CA:  Sage Publications, Inc.


George, M. (2002).  Lean Six Sigma. New York, NY:  McGraw-Hill.

Greer, M. (2010). The project management minimalist: Just enough PM to rock your projects! (Laureate custom ed.). Baltimore: Laureate Education, Inc.
 
Sholtes, P., Joiner, B., & Streibel, B.  (2001).  The TEAM Handbook (2nd ed.). Madison, WI: Oriel
 
Portny, S. E., Mantel, S. J., Meredith, J. R., Shafer, S. M., Sutton, M. M., & Kramer, B. E. (2008). Project management: Planning, scheduling, and controlling projects. Hoboken, NJ: John Wiley & Sons, Inc. 

Sunday, January 9, 2011

Lots of writing, but little posting

Since October, I've done a lot of writing.  Some for school, but most of it came as a release after James' murder.  The only thing is I never released most of it since I wanted to go back and edit the posts, which never happened.  So today, I'm combining some of the posts and publishing them.  Maybe in the future I'll go back and edit them and clean them up the way I envisioned when I began writing.
 ----
Over the past two months I have been reflecting on my family and our experiences together.  It's been two months since James was murdered, with the preliminary examination occurring yesterday and surfacing more memories of my family's time together.  Coming from a large and close extended family, there are many memories of my cousins, aunts, uncles, and grandmother growing up.  With about a 15 year age gap between sets of cousins, it's been interesting to see the younger one's reactions when us old-timers tell stories of our youth.

There are certain things that my large, Polish family did together while I was growing up.  Every Sunday was spent at my Grandmother's house and all my cousins were there.  We had a blast playing games together and picking on each other.  Well, maybe we didn't enjoy ALL our time together, but it turned into fond memories by all involved overtime.  Our parents would go on vacation together and my grandmother would watch between 4-6 of us at a time.  Boy, the stories we can tell these days!  But after she passed away and we all began to grow up, our younger cousins missed out on that opportunity.  They think we are crazy when we tell them of the games we played, our sleeping bag races, the hide-n-seek games where we would "forget" to look for someone, our trips to the corner store to buy gum, or the absolutely crazy times we had at the "dirt hills" where we would ride our bikes down a vertical drop with several trees in our way.  The seven of us were best friends and have so many good memories of our times together.

The younger set missed out on that opportunity to play and get into trouble together every weekend.  At the funeral, through emails, and at Christmas dinner, the younger ones have started to ask us to tell more stories about what we did at Grandma's house, what their father was like before he married and had kids, and how we all survived without maiming each other.  (Okay, there might have been a few stitches here and there, but nothing serious!)  The best thing I've learned from all the reminiscing we are beginning to do is we all remember different pieces of our youth.  Even though we've grown apart in both life and geographic location, we remain connected through our memories.  No single one of us can paint a complete picture of our past without the rest of us to help them fill in the void that old age (or conscious effort) leaves.



Sunday, December 26, 2010

Future of Distance Learning

As online and distance learning continues to mature, I believe it will gain more and more acceptance. The idea of obtaining a degree based on online work, as defined by Simonson et al (2009) as at least 80% of the curriculum delivered online, will become more mainstream as more people matriculate into the workforce and prove it can be a successful method in education. I think people still associate online degrees with correspondence courses from the 1970’s and ‘80’s or with diploma mills of the 1990’s and 2000’s. Part of the perception comes from virtual schools that do not offer a physical location. These schools are unable to make statements as “same faculty/classes/standards as traditional, face-to-face classes”. Studies performed by Gambescia and Paolucci (2009) point out the difference statements such as the above make in the perception of an online program. Since online schools are unable to make such statements, they may be unfairly judged and have to work harder at proving their value and conformance to brick and mortar schools offering online courses. 

In the future, online universities will become more accepted as equivalent to face-to-face schools. This acceptance will come, in part, from the growing number of graduates from such schools. As they begin to apply their degrees and knowledge to jobs and real-life applications, the negative perception of online schools will diminish. Also, as the number of online courses offered by traditional schools grows, the stigma will lessen. Time will be the largest factor in gaining acceptance. In the next 5 to 10 years, online learning will continue to grow regardless of if the courses are offered through a traditional school or virtual, online university. In the next 10 to 20 years, I think all universities will offer online classes and public perceptions will be positive. I also think that as more high schools offer online classes and become virtual, acceptance will grow and become commonplace. Schools such as Insight, offered by Washington state (Shaw, 2006), are becoming more accepted for high school, which in turn will translate to acceptance for higher education schools. In the world of instructional design, the negative perceptions can be minimized by offering high quality curricula and keeping up with technology changes. The article “Issues in Distance Learning” written in 1995 (Sherry) is still valid today. Instructional designers (ID) should pay careful attention to the use of technology, visual imagery, communication, and active, inquiry, and constructivist-type of learning. By making classes interactive and participative, the stigma of being a diploma mill will be lessened and students will be able to maximize their value of the course. 

I believe both lean and six sigma methods can be successfully applied to education as suggested by Emiliani (2004) and Hargrove and Burge (2002). With my personal background in continuous improvement tools, specifically lean and six sigma, I hope to apply these skills to the ID process and learning process. Items to look at in distance education include determining the value for the students and companies they will be employed at, the number of transactions a learner makes within the class room environment, effective use of media, graphics and text, and improving retention rates of both learners and knowledge. As tools and methods of online delivery evolve, it will be up to us as ID professionals to ensure our messages remain clear and effective. 

References 
Emiliani, M (2002). Improving business school courses by applying lean principles and practices. Retrieved December 26, 2010 from http://www.members.nae.edu/nae/caseecomnew.nsf/0754c87f163f599e85256cca00588f49/862570b6006873128625724b007511b1/$FILE/ATT131QJ/Lean%20Course1.pdf 

Hargrove, S and Burge, L. (2002). Developing a six sigma methodology for improving retention in engineering education. Retrieved December 26, 2010 from http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.20.6603&rep=rep1&type=pdf 

Shaw, L. (2006). First online high school in state planned for fall. Seattle Times. Retrieved December 26, 2010 from http://seattletimes.nwsource.com/html/education/2002981361_insight09m.html 

Sherry, L. (1995). Issues in Distance Learning. International Journal of Educational Telecommunications, 1(4), 337-365. Charlottesville, VA: AACE. Retrieved November 3, 2010 from http://www.editlib.org/p/8937 

Simonson, M., Smaldino, S., Albright, M., & Zvacek, S. (2009). Teaching and learning at a distance: Foundations of distance education (4th ed.) Boston, MA: Pearson.

Sunday, December 19, 2010

EDUC 6135 - Distance Learning

Designing an online class is different than a traditional face-to-face class.  Different strategies for planning, content, and evaluation are used in addition to delivery.  Unfortunately, I do not have a way to attach my pdf file to this post, so I will copy it below in addition to providing a link hosting the pdf.  The pdf can be found at: http://www.myhaikuclass.com/leanne.kozicki/pdffile

----------------

As you begin to convert your traditional face-to-face class to a blended learning format, there are several items you should keep in mind.  In the rush of excitement to convert a class to an online format, the following should help ensure success in the process.

Pre-Planning

Designing a course for a blended learning environment, the first step is to determine what a face-to-face environment that an online environment doesn’t and vice versa.  Are there specific interactions, simulations, or activities that work better in one environment over the other?  This step will help you determine the content and structure of your blended learning class and what tools to use (Simonson et al, 2009; Cook & Dupras, 2004).
If your class is currently taught, you may have a good idea who your learners are and what their comfort level is with various technology-based tools.  If this is a new class, you may need to conduct a learner analysis to gauge their computer literacy and technology threshold.  It would be bad to plan on using complicated technology with all the bells and whistles when the target learners have rarely used a computer.
Once you have decided how to split the class into a face-to-face portion and an online portion, selected the technology tools to assist with the online delivery, the sequence of material should be planned.  Will each module be sequential?  Will the material be consistently presented?  For example, will the class always have a reading assignment, an online discussion, an in-person lecture, assignment, and then quiz?

Planning

After you’ve thought about technology use, course layout, and activities, you’ll need to start planning.  There are many factors to consider when planning for an online course and this by no means is a comprehensive guide.  Some items to keep in mind are:  an orientation needs to be developed, explanation of requirements for technology and participation, and ADA compliance (Gerson, 2000).
Learning techniques and styles that have proven to be adapted well to online environments include:  learner interaction, problem-based learning, self-directed learning, case-based learning, self-assessments, journals/portfolios, and feedback from peers and instructors (Cook & Dupras, 2004).  During your class conversion, determine which techniques and styles can be utilized and how to accomplish it.

Content

            As each module is broken down, an effective method to use is the E-CLASS model.  Each module should contain components to Explain, Clarify, Look, Act, Share, Self-Evaluate/Submit.  This method can be used to apply a consistent structure for each lesson or module taught (Gerson, 2000).
            If videos and other multimedia are to be used, plan to break the segments into duration of no longer than ten minutes. This will help keep students attention and allow them to process better.  If you wish to place instructional materials such as reading and textbooks online, try to keep the material in smaller chunks as well.  Learners may have to download more information, but they will be able to locate is quicker when the material is in smaller, more discrete bundles (Simonson et al, 2009). 
            Discussions online have proven to be a valuable tool in distance learning (Simonson et al., 2009; Tam, 2000; Huang, 2002).  As an instructor, you need to prepare clear discussion topics as well as criteria for participation and grading.  As a rule of thumb, learners should be expected to post their thoughts to the original discussion and respond to at least two other students posting.  As an instructor, you should be prepared to respond to approximately one in every four posts, selecting different students each discussion (Simonson et al., 2009).

Changing Role

As you transition to a blended-learning or online environment, you will learn that your role is also changing.  Learners will have the opportunity to elaborate and be more self-directed in the new environment.  Your role will be to guide and provide additional insight by asking questions or gently leading learners back to the purpose of the exercise (Simonson et al., 2009; Huang 2002; Tam, 2000).



Checklist for Online Classes


c  Technology requirements defined
c  ADA compliant
c  Active learning encouraged – learner interactions, self-directed, problem based, self-assessments, and/or reflections are included
c  Grading criteria is clearly defined and posted
c  Discussions are used as part of the learning
c  Participation criteria is defined and posted for discussions
c  Instructor can respond to one in every 4 discussion posts
c  Media is available in 10 minute lengths
c  Effective and varied use of media, including audio, graphics, and video
c  Modules follow the E-CLASS model:
§  Explain
§  Clarify
§  Look
§  Act
§  Share
§  Self Evaluate/Submit


References

Cook, D. A. and Dupras, D. M. (2004), A Practical Guide To Developing Effective Web-based Learning. Journal of General Internal Medicine, 19: 698–707. doi: 10.1111/j.1525-1497.2004.30029.x           

Huang, H. (2002). Toward constructivism for adult learners in online learning environments. British Journal of Educational Technology, 33(1), 27-37. Retrieved from Academic Search Complete database.

Gerson, S. M. (2000). E-CLASS: Creating a Guide to Online Course Development for Distance Learning Faculty. Online Journal of Distance Learning Administration, 3(4), Retrieved from EBSCOhost.

Simonson, M., Smaldino, S., Albright, M., & Zvacek, S. (2009). Teaching and learning at a distance: Foundations of distance education (4th ed.) Boston, MA: Pearson. 


Sunday, December 5, 2010

Open Courseware (MIT)

For the past 6 or 7 years, I have periodically used MIT's OpenCourseWare (OCW) to enhance my knowledge about specific topics or gain a better understanding of how to present material to an audience.  MIT debuted the concept of Open Courses in 2002 and currently offer over 2000 courses online.  Course material such as lecture notes, presentations, references, assigned readings, practice problems, tests, video, and audio files are available to the general public for their benefit.  In general, as stated on their website, the materials are designed to support a "dynamic classroom interaction" and people viewing and working through the classes will not receive credit (MIT, 2010).  In general, my impression of material offered is an extension of face-to-face (F2F) materials as the website states, enabling an individual to refresh or expand their current knowledge of a subject. 

For this particular analysis, I took a closer look at a course entitled "Introduction to Lean Six Sigma Methods" which was originally conducted in 2008.  To provide full disclosure, I have previously worked with MIT's Lean Advancement Institute, including one of the instructors credited in the material.  The class provides video lectures available on YouTube and files available on iTunesU lasting approximately 30-45 minutes each,  lecture notes, exercises, and some supplemental materials. The course was analyzed against the following questions:
  • Is the course designed for a distance learning environment?
  • Are recommendations by Simonson, Smaldino, Albright & Zvacek followed?
  • Are there activities that maximize learning?
Based on my observations of the class, in addition to the About OCW web page information, the course is not designed for a distance learning environment, Simonson et al's recommendations are not followed, but there are activities which maximize learning for the learner, although some activities are best performed simultaneously by a group of people.  Oblinger and Hawkins (2006) make the distinction of providing course content online and creating a learning environment online.  "Introduction to Lean Six Sigma" provides content but does not create a learning environment to foster communication and collaboration.   Oblinger and Hawkins also ask the question, "If a course is simply the equivalent of its content, why are courses not defined by books rather than classrooms and faculty?"  This is the case for "Introduction to Lean Six Sigma", where the content and F2F learner/instructor interactions are made available to view, but no interaction for the distance learner exists.  Simonson et al (2009) also echo the same sentiments about posting content and not providing an avenue for interactivity.  They provide a term that has evolved from merely posting content online and considering it a course:  shovelware.

Simonson et al also list several recommendations for creating and teaching online courses.  Many of these recommendations revolve around teacher-learner interaction by keeping learners informed, testing learner's knowledge, applying adult learning principles, and defining course outcomes.  "Introduction to Lean Six Sigma" does provide learning outcomes from the modules presented, but lacks the instructor-learner interaction described in the book Teaching and Learning at a Distance.  Due to these items, the class analyzed would fall into a Cycle 1 type course.  Cycle 1 courses are courses which include basic technologies such as PowerPoint and video-taped lectures (Simonson et al, 2009).

However, one of the strengths of the course, even though it is classified as Cycle 1, is the activities and supplemental material provided to distance learners.  These activities can enhance the learning and understanding of the topics presented.  The activities are a type of simulation that bring to life the concepts the instructors are speaking about.  Morrison, Ross, and Kemp (2007) state that simulations work well in small group formats and promote active learning.  Some of the activities presented in "Introduction to Lean Six Sigma" can be performed alone and promote the type of deep, active learning Morrison, Ross, and Kemp's work details.

Overall, the course provides useful information and can help an individual looking to gain more knowledge of lean six sigma.  Even though the course was not designed for online or distance learning, it can help a self-paced, inquisitive individual learn more about the topic.  Having personally been involved in teaching a derivative of the course, as well as a student myself, it is a great reference and memory jogger of the actual course.  My conclusion is that the online course should not replace the actual F2F course as it stands today.


References

MIT OpenCourseWare. (no date).  Retrieved December 5, 2010 from http://ocw.mit.edu/about/

Morrison, G. R., Ross, S. M., & Kemp, J. E. (2007). Designing effective instruction (5th ed.). San Francisco: John Wiley and Sons, Inc.

Murman, E.,  McManus, H., Haggerty, A., and Weigel, A. (2008)  16.660 Introduction to Lean Six Sigma Methods, January IAP 2008. (Massachusetts Institute of Technology: MIT OpenCourseWare), Accessed 05 Dec, 2010 from:  http://ocw.mit.edu/courses/aeronautics-and-astronautics/16-660-introduction-to-lean-six-sigma-methods-january-iap-2008/ 

Oblinger, D. and Hawkins, B. (2006) The Myth About Online Course Development.  EDUCAUSE Review, vol. 41, no. 1 (January/February 2006): 14–15.  Retrieved December 4, 2010 from http://www.educause.edu/EDUCAUSE+Review/EDUCAUSEReviewMagazineVolume41/TheMythaboutOnlineCourseDevelo/158037

Simonson, M., Smaldino, S., Albright, M., & Zvacek, S. (2009). Teaching and learning at a distance: Foundations of distance education (4th ed.) Boston, MA: Pearson.