Sunday, December 26, 2010

Future of Distance Learning

As online and distance learning continues to mature, I believe it will gain more and more acceptance. The idea of obtaining a degree based on online work, as defined by Simonson et al (2009) as at least 80% of the curriculum delivered online, will become more mainstream as more people matriculate into the workforce and prove it can be a successful method in education. I think people still associate online degrees with correspondence courses from the 1970’s and ‘80’s or with diploma mills of the 1990’s and 2000’s. Part of the perception comes from virtual schools that do not offer a physical location. These schools are unable to make statements as “same faculty/classes/standards as traditional, face-to-face classes”. Studies performed by Gambescia and Paolucci (2009) point out the difference statements such as the above make in the perception of an online program. Since online schools are unable to make such statements, they may be unfairly judged and have to work harder at proving their value and conformance to brick and mortar schools offering online courses. 

In the future, online universities will become more accepted as equivalent to face-to-face schools. This acceptance will come, in part, from the growing number of graduates from such schools. As they begin to apply their degrees and knowledge to jobs and real-life applications, the negative perception of online schools will diminish. Also, as the number of online courses offered by traditional schools grows, the stigma will lessen. Time will be the largest factor in gaining acceptance. In the next 5 to 10 years, online learning will continue to grow regardless of if the courses are offered through a traditional school or virtual, online university. In the next 10 to 20 years, I think all universities will offer online classes and public perceptions will be positive. I also think that as more high schools offer online classes and become virtual, acceptance will grow and become commonplace. Schools such as Insight, offered by Washington state (Shaw, 2006), are becoming more accepted for high school, which in turn will translate to acceptance for higher education schools. In the world of instructional design, the negative perceptions can be minimized by offering high quality curricula and keeping up with technology changes. The article “Issues in Distance Learning” written in 1995 (Sherry) is still valid today. Instructional designers (ID) should pay careful attention to the use of technology, visual imagery, communication, and active, inquiry, and constructivist-type of learning. By making classes interactive and participative, the stigma of being a diploma mill will be lessened and students will be able to maximize their value of the course. 

I believe both lean and six sigma methods can be successfully applied to education as suggested by Emiliani (2004) and Hargrove and Burge (2002). With my personal background in continuous improvement tools, specifically lean and six sigma, I hope to apply these skills to the ID process and learning process. Items to look at in distance education include determining the value for the students and companies they will be employed at, the number of transactions a learner makes within the class room environment, effective use of media, graphics and text, and improving retention rates of both learners and knowledge. As tools and methods of online delivery evolve, it will be up to us as ID professionals to ensure our messages remain clear and effective. 

References 
Emiliani, M (2002). Improving business school courses by applying lean principles and practices. Retrieved December 26, 2010 from http://www.members.nae.edu/nae/caseecomnew.nsf/0754c87f163f599e85256cca00588f49/862570b6006873128625724b007511b1/$FILE/ATT131QJ/Lean%20Course1.pdf 

Hargrove, S and Burge, L. (2002). Developing a six sigma methodology for improving retention in engineering education. Retrieved December 26, 2010 from http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.20.6603&rep=rep1&type=pdf 

Shaw, L. (2006). First online high school in state planned for fall. Seattle Times. Retrieved December 26, 2010 from http://seattletimes.nwsource.com/html/education/2002981361_insight09m.html 

Sherry, L. (1995). Issues in Distance Learning. International Journal of Educational Telecommunications, 1(4), 337-365. Charlottesville, VA: AACE. Retrieved November 3, 2010 from http://www.editlib.org/p/8937 

Simonson, M., Smaldino, S., Albright, M., & Zvacek, S. (2009). Teaching and learning at a distance: Foundations of distance education (4th ed.) Boston, MA: Pearson.

Sunday, December 19, 2010

EDUC 6135 - Distance Learning

Designing an online class is different than a traditional face-to-face class.  Different strategies for planning, content, and evaluation are used in addition to delivery.  Unfortunately, I do not have a way to attach my pdf file to this post, so I will copy it below in addition to providing a link hosting the pdf.  The pdf can be found at: http://www.myhaikuclass.com/leanne.kozicki/pdffile

----------------

As you begin to convert your traditional face-to-face class to a blended learning format, there are several items you should keep in mind.  In the rush of excitement to convert a class to an online format, the following should help ensure success in the process.

Pre-Planning

Designing a course for a blended learning environment, the first step is to determine what a face-to-face environment that an online environment doesn’t and vice versa.  Are there specific interactions, simulations, or activities that work better in one environment over the other?  This step will help you determine the content and structure of your blended learning class and what tools to use (Simonson et al, 2009; Cook & Dupras, 2004).
If your class is currently taught, you may have a good idea who your learners are and what their comfort level is with various technology-based tools.  If this is a new class, you may need to conduct a learner analysis to gauge their computer literacy and technology threshold.  It would be bad to plan on using complicated technology with all the bells and whistles when the target learners have rarely used a computer.
Once you have decided how to split the class into a face-to-face portion and an online portion, selected the technology tools to assist with the online delivery, the sequence of material should be planned.  Will each module be sequential?  Will the material be consistently presented?  For example, will the class always have a reading assignment, an online discussion, an in-person lecture, assignment, and then quiz?

Planning

After you’ve thought about technology use, course layout, and activities, you’ll need to start planning.  There are many factors to consider when planning for an online course and this by no means is a comprehensive guide.  Some items to keep in mind are:  an orientation needs to be developed, explanation of requirements for technology and participation, and ADA compliance (Gerson, 2000).
Learning techniques and styles that have proven to be adapted well to online environments include:  learner interaction, problem-based learning, self-directed learning, case-based learning, self-assessments, journals/portfolios, and feedback from peers and instructors (Cook & Dupras, 2004).  During your class conversion, determine which techniques and styles can be utilized and how to accomplish it.

Content

            As each module is broken down, an effective method to use is the E-CLASS model.  Each module should contain components to Explain, Clarify, Look, Act, Share, Self-Evaluate/Submit.  This method can be used to apply a consistent structure for each lesson or module taught (Gerson, 2000).
            If videos and other multimedia are to be used, plan to break the segments into duration of no longer than ten minutes. This will help keep students attention and allow them to process better.  If you wish to place instructional materials such as reading and textbooks online, try to keep the material in smaller chunks as well.  Learners may have to download more information, but they will be able to locate is quicker when the material is in smaller, more discrete bundles (Simonson et al, 2009). 
            Discussions online have proven to be a valuable tool in distance learning (Simonson et al., 2009; Tam, 2000; Huang, 2002).  As an instructor, you need to prepare clear discussion topics as well as criteria for participation and grading.  As a rule of thumb, learners should be expected to post their thoughts to the original discussion and respond to at least two other students posting.  As an instructor, you should be prepared to respond to approximately one in every four posts, selecting different students each discussion (Simonson et al., 2009).

Changing Role

As you transition to a blended-learning or online environment, you will learn that your role is also changing.  Learners will have the opportunity to elaborate and be more self-directed in the new environment.  Your role will be to guide and provide additional insight by asking questions or gently leading learners back to the purpose of the exercise (Simonson et al., 2009; Huang 2002; Tam, 2000).



Checklist for Online Classes


c  Technology requirements defined
c  ADA compliant
c  Active learning encouraged – learner interactions, self-directed, problem based, self-assessments, and/or reflections are included
c  Grading criteria is clearly defined and posted
c  Discussions are used as part of the learning
c  Participation criteria is defined and posted for discussions
c  Instructor can respond to one in every 4 discussion posts
c  Media is available in 10 minute lengths
c  Effective and varied use of media, including audio, graphics, and video
c  Modules follow the E-CLASS model:
§  Explain
§  Clarify
§  Look
§  Act
§  Share
§  Self Evaluate/Submit


References

Cook, D. A. and Dupras, D. M. (2004), A Practical Guide To Developing Effective Web-based Learning. Journal of General Internal Medicine, 19: 698–707. doi: 10.1111/j.1525-1497.2004.30029.x           

Huang, H. (2002). Toward constructivism for adult learners in online learning environments. British Journal of Educational Technology, 33(1), 27-37. Retrieved from Academic Search Complete database.

Gerson, S. M. (2000). E-CLASS: Creating a Guide to Online Course Development for Distance Learning Faculty. Online Journal of Distance Learning Administration, 3(4), Retrieved from EBSCOhost.

Simonson, M., Smaldino, S., Albright, M., & Zvacek, S. (2009). Teaching and learning at a distance: Foundations of distance education (4th ed.) Boston, MA: Pearson. 


Sunday, December 5, 2010

Open Courseware (MIT)

For the past 6 or 7 years, I have periodically used MIT's OpenCourseWare (OCW) to enhance my knowledge about specific topics or gain a better understanding of how to present material to an audience.  MIT debuted the concept of Open Courses in 2002 and currently offer over 2000 courses online.  Course material such as lecture notes, presentations, references, assigned readings, practice problems, tests, video, and audio files are available to the general public for their benefit.  In general, as stated on their website, the materials are designed to support a "dynamic classroom interaction" and people viewing and working through the classes will not receive credit (MIT, 2010).  In general, my impression of material offered is an extension of face-to-face (F2F) materials as the website states, enabling an individual to refresh or expand their current knowledge of a subject. 

For this particular analysis, I took a closer look at a course entitled "Introduction to Lean Six Sigma Methods" which was originally conducted in 2008.  To provide full disclosure, I have previously worked with MIT's Lean Advancement Institute, including one of the instructors credited in the material.  The class provides video lectures available on YouTube and files available on iTunesU lasting approximately 30-45 minutes each,  lecture notes, exercises, and some supplemental materials. The course was analyzed against the following questions:
  • Is the course designed for a distance learning environment?
  • Are recommendations by Simonson, Smaldino, Albright & Zvacek followed?
  • Are there activities that maximize learning?
Based on my observations of the class, in addition to the About OCW web page information, the course is not designed for a distance learning environment, Simonson et al's recommendations are not followed, but there are activities which maximize learning for the learner, although some activities are best performed simultaneously by a group of people.  Oblinger and Hawkins (2006) make the distinction of providing course content online and creating a learning environment online.  "Introduction to Lean Six Sigma" provides content but does not create a learning environment to foster communication and collaboration.   Oblinger and Hawkins also ask the question, "If a course is simply the equivalent of its content, why are courses not defined by books rather than classrooms and faculty?"  This is the case for "Introduction to Lean Six Sigma", where the content and F2F learner/instructor interactions are made available to view, but no interaction for the distance learner exists.  Simonson et al (2009) also echo the same sentiments about posting content and not providing an avenue for interactivity.  They provide a term that has evolved from merely posting content online and considering it a course:  shovelware.

Simonson et al also list several recommendations for creating and teaching online courses.  Many of these recommendations revolve around teacher-learner interaction by keeping learners informed, testing learner's knowledge, applying adult learning principles, and defining course outcomes.  "Introduction to Lean Six Sigma" does provide learning outcomes from the modules presented, but lacks the instructor-learner interaction described in the book Teaching and Learning at a Distance.  Due to these items, the class analyzed would fall into a Cycle 1 type course.  Cycle 1 courses are courses which include basic technologies such as PowerPoint and video-taped lectures (Simonson et al, 2009).

However, one of the strengths of the course, even though it is classified as Cycle 1, is the activities and supplemental material provided to distance learners.  These activities can enhance the learning and understanding of the topics presented.  The activities are a type of simulation that bring to life the concepts the instructors are speaking about.  Morrison, Ross, and Kemp (2007) state that simulations work well in small group formats and promote active learning.  Some of the activities presented in "Introduction to Lean Six Sigma" can be performed alone and promote the type of deep, active learning Morrison, Ross, and Kemp's work details.

Overall, the course provides useful information and can help an individual looking to gain more knowledge of lean six sigma.  Even though the course was not designed for online or distance learning, it can help a self-paced, inquisitive individual learn more about the topic.  Having personally been involved in teaching a derivative of the course, as well as a student myself, it is a great reference and memory jogger of the actual course.  My conclusion is that the online course should not replace the actual F2F course as it stands today.


References

MIT OpenCourseWare. (no date).  Retrieved December 5, 2010 from http://ocw.mit.edu/about/

Morrison, G. R., Ross, S. M., & Kemp, J. E. (2007). Designing effective instruction (5th ed.). San Francisco: John Wiley and Sons, Inc.

Murman, E.,  McManus, H., Haggerty, A., and Weigel, A. (2008)  16.660 Introduction to Lean Six Sigma Methods, January IAP 2008. (Massachusetts Institute of Technology: MIT OpenCourseWare), Accessed 05 Dec, 2010 from:  http://ocw.mit.edu/courses/aeronautics-and-astronautics/16-660-introduction-to-lean-six-sigma-methods-january-iap-2008/ 

Oblinger, D. and Hawkins, B. (2006) The Myth About Online Course Development.  EDUCAUSE Review, vol. 41, no. 1 (January/February 2006): 14–15.  Retrieved December 4, 2010 from http://www.educause.edu/EDUCAUSE+Review/EDUCAUSEReviewMagazineVolume41/TheMythaboutOnlineCourseDevelo/158037

Simonson, M., Smaldino, S., Albright, M., & Zvacek, S. (2009). Teaching and learning at a distance: Foundations of distance education (4th ed.) Boston, MA: Pearson.

Sunday, November 21, 2010

Week 3: Distance Learning Technology


Scenario 3: Asynchronous Training

In an effort to improve its poor safety record, a biodiesel manufacturing plant needs a series of safety training modules. These stand-alone modules must illustrate best practices on how to safely operate the many pieces of heavy machinery on the plant floor. The modules should involve step-by-step processes and the method of delivery needs to be available to all shifts at the plant. As well, the shift supervisors want to be sure the employees are engaged and can demonstrate their learning from the modules.


Recommendation: 

In response to the above situation and scenario, I suggest using podcasting technology with an interactive quiz to deliver safety modules across all shifts.  There are several types of podcasts to select from, depending on the ease and comfort of the training staff.  The first is a narrated PowerPoint presentation that provides step-by-step graphics and narration demonstrating the best practices used to operate the machinery.  Videos are also able to be embedded in PowerPoint.  The next is an Adobe Flash media file combining images, graphics, video, and audio.  Other acceptable media formats exist to create podcasts, but at a minimum, it should include audio and graphics to be considered successful.

The podcast can be deployed via several means, depending on the security and needs of the company.  The preference is to place the podcast in an LMS or CMS that can track employee participation and determine if a specific employee viewed the podcast or not.  Other options include placing the podcast on a server and sending a link to all employees, uploading to iTunes U, or placing the file on a management system like SharePoint.

A quiz will also be needed to support the supervisors' need to have employees demonstrate learning.  If an LMS or CMS is being used to organize and administer the safety modules, an interactive quiz can be used which incorporates videos, graphics, audio, and text.  Moodle has this capability and other CMS packages like Haiku have similar capabilities.  Another option is to use SurveyMonkey to administer the test and track participation and results.

Rationale:
Podcasting can be successful for safety training.  Because podcasting takes advantage of images and sound, use of two or more media types will help employees retain information by using what is known as the dual-code theory (Ormrod, J., Schunk, D., Gredler, M., 2008; Laureate Education, Inc., 2010).  This application meets Simonson et al (2009) characteristics of an effective podcast:  each piece of machinery can be broken down and safety practices can be explained with the help of imagery and verbal cues within 10 minutes; the training will be part of an ongoing initiative, making each single podcast part of a larger event and program; if best practices change over time, the podcasts can be updated and quickly deployed with new revisions.  Several studies support the effectiveness of podcasting, especially when dealing with spatially and/or geographically separated learners.  Lee and Chan (2007) concluded in their study that learners felt podcasts were beneficial by clarifying and enhancing subject material.  Lonn and Teasley (2009) had similar conclusions in their study, stating that podcasting can help students learn by allowing self-monitoring and self-assessment to occur.


Several examples exist which showcase podcasting as a learning tool.  iTunes U is probably the most recognizable example.  MIT also has an open course, which provides lesson materials, including media files.  Of course, YouTube also provides countless files on everything imaginable -- from music videos to instructional videos.  Here are a sample of YouTube videos:  ear plug safety, personal protective equipment, and hardware simulation and training.

Overall, the use of podcasts and a test will be the most effective for covering all shifts at the plant. The stand-alone modules can illustrate the best practices with audio and visual imagery, be rapidly deployed, quickly edited if needed, and be part of an over-arching site message.
  
References

Laureate Education, Inc. (Producer). (2010). The technology of distance education [DVD]. In EDUC 6135. Baltimore, MD.

Lee, M., and Chan, A. (2007) Reducing the Effects of Isolation and Promoting Inclusivity for Distance Learners through       Podcasting.  Turkish Online Journal of Distance Education-TOJDE  January 2007 ISSN 1302–6488, Volume: 8 Number: 1 Article: 7 Retrieved from:  http://eric.ed.gov/ERICWebPortal/detail?accno=ED494811 

Lonn, S., Teasley, S. (2009) Podcasting in higher education: What are the implications for teaching and learning?. The 
Internet and Higher Education (12-2), Pages 88-92. ISSN 1096-7516, DOI: 10.1016/j.iheduc.2009.06.002.
 
Ormrod, J., Schunk, D., & Gredler, M. (2009). Learning theories and instruction  (Laureate custom edition). 
New York: Pearson.  

Simonson, M., Smaldino, S., Albright, M., & Zvacek, S. (2009). Teaching and learning at a distance: Foundations of distance education (4th ed.) Boston, MA: Pearson. 

Sunday, November 7, 2010

Distance Learning

Distance learning is gaining popularity in today's world, whether it be within companies or within educational institutions.  But what is distance learning and how is it defined?  To me, distance learning is the process used to acquire knowledge from a reputed organization, institution, or instructor where the learner and instructor are geographically separated.  The process involves interaction, including feedback from both the learner and instructor.  I do not feel like correspondence or self-paced study truly fit my idea of distance learning because, in my mind at least, there is little interaction between the learner and instructor.  In these types of learning environments, I primarily see the instructor's role as grading assignments and tests and not as helping to transfer knowledge between the two parties.  In Teaching and learning at a distance: Foundations of distance education (2009), the authors define distance learning as "institution-based, formal education where the learning group is separated and where interactive telecommunication systems are used to connect learners, resources, and instructors (p.32)."  What stands out to me is the specific inclusion of interactive telecommunication systems within the definition.  I believe the authors' definition, as well as a revised copy of my own, is independent of industry, profession, or technical knowledge of an individual.

Having experienced several types of distance learning, I find many fit the evolution of distance learning as documented by researchers and individuals in the instructional design (ID) fields.  Correspondence, or self-paced study, are purported to be over 100 years old (Simonson et al, 2009; Imel, S., 1998; Sherry, L., 1995) and are recognized to be the first forms of distance learning.  I had previously been enrolled in a self-paced study class where I was given the materials to learn on my own.  There was no interaction with the instructor or other students regarding the learning aspect.  The instructor's role was to grade my exams, not to teach, share knowledge, or provide feedback.  This was my least favorite type of learning, mainly because there was no interaction with anyone.  I had to hire a local tutor to help answer my questions and draw connections to real life examples.  The fact that it was a differential equations class didn't help either.


The next distance learning class I experienced was a taped lecture, similar to what broadcast television offered in the 1950's (Simonson et al, 2009).  This time, I was in the class that was taped and the tapes were mailed to a sister school, approximately 500 miles away.  I remember being glad I was in the class that was taped and not viewing the tapes.  Questions I had were answered in real time, material was clarified when needed, and we were able to review homework problems that specifically gave us difficulty in class.  I recall feeling a bit sorry for the remote students not being able to engage with the instructor as were able to to.

Most recently, I have been enrolled in a distance learning university.  While the concept seems new, distance teaching universities have been around since the 1960's and 70's (Simonson et al, 2009).  The program I am enrolled in takes advantage of technological advances such as two-way communication and media programs which are streamed on demand.  The use of technology in learning has been slowly evolving, with the largest explosion occurring in the late 1980's and 1990's (Imel, S.,  1998; Sherry, L., 1995).  I have learned the most from courses closely fitting my above description.  These classes used technology such as discussion boards, email, and Web 2.0 tools and required learners to collaborate on projects.  Instructors provided quick feedback regarding learner's work, within a day or two.  With the use of technology, learner's have an experience more closely related to traditional, face-to-face (F2F) learning.

The future of distance learning will continue to evolve as technology evolves.  I echo Imel's (1998) sentiments that distance learning will offer more rich interactions, mimicking interactions found in face-to-face learning environments.  While the methods used in distance classes will be different than F2F classes, the goals and objectives for learning will remain the same.  Moller, Forshay & Huett (2008) mention the move to a blended learning environment, where distance education and traditional F2F components will become more popular in the future.  I have already begun to see this at some universities, colleges, and high schools.

Overall, the future changes and possibilities to distance learning will be tied into technology advances.  I cannot begin to predict what that will look like, much like no one knew in 1950 how we would be capable of learning from a distance in 2010.  The trend we are currently seeing with more acceptance and popularity of distance learning will continue to increase.  Distance learning will not replace F2F classes, but will augment and complement traditional classes.  The future I envision and direction we seem to be headed fits my personal definition of distance learning.  My revised definition of distance learning is: distance learning is the process used to acquire knowledge from a reputed organization, institution, or instructor where the learner and instructor are geographically separated and uses technology and telecommunication for interaction, including feedback from both the learner and instructor. 

Elements of Effective Distance Learning


References

Imel, S. (1998). Distance Learning. Myths and Realities. Retrieved from ERIC database.

Moller, L., Foshay, W., & Huett, J. (2008). The Evolution of Distance Education: Implications for Instructional Design on the Potential of the Web. TechTrends: Linking Research & Practice to Improve Learning, 52(4), 66-70. doi:10.1007/s11528-008-0179-0.

Sherry, L. (1995). Issues in Distance Learning. International Journal of Educational Telecommunications, 1(4), 337-365. Charlottesville, VA: AACE. Retrieved November 3, 2010 from http://www.editlib.org/p/8937.
 
Simonson, M., Smaldino, S., Albright, M., & Zvacek, S. (2009). Teaching and learning at a distance: Foundations of distance education (4th ed.) Boston, MA: Pearson.


Sunday, October 31, 2010

Life and Death

20 years ago was a great day, sunny & warm, with the start of the crisp fall air beginning to descend upon us. The leaves were turning magnificent colors of crimson and gold. I remember the day, playing outside as I babysat my younger cousin who was 2 1/2 at the time. The two of us were running in the yard, building forts from the leaves that fell from above. We were laughing, having a great time knowing our lives would be forever changed that day. A new addition to the family was arriving, as my aunt was in labor with our newest family addition, James.

Just shy of 20 years to James' birthday, our lives would be once again touched, this time with the loss of James. A week and a half after he was taken from us, it still feels surreal. There are no words to describe the emotions, feelings, remembrances, and thoughts you feel when someone close to you is taken by an act of violence. The grieving process is different - there was no illness to say "He's in a better place now", there isn't a long life to celebrate, there is no sense to what happened. There is only emptiness, loneliness, and confusion in his absence. There is also anger; immense anger that two teenagers aged 16 and 18 could take another person's life so quickly and without thought. Unfortunately, the anger quickly turns to despair and bitterness and you begin to question what this world is coming to. How do two teenagers take some one's life becomes the question of the day - the debate begins about how much are their parents responsible versus society versus the teenagers themselves. There are no single, binary answers.

On James' 20th birthday, a week and a half after he was murdered, no one in our family is the same. We're going through our lives like robots, still in shock over what happened. It's hard to continue on with day to day activities like nothing happened. Something did happen. We are all learning how to push through the pain and be happy like he would have wanted. We all learned a little more about ourselves. Our thoughts and ideals changed. Whether you think you are pro-death penalty or against it, who should be held accountable in cases like this, and what your idea of justice is -- trust me, it may change once you go through something like this. This is what surprised me the most. What I thought I knew about myself prior to this has changed since these events. And I may have a different view than my family and friends, but I respect and understand how they feel and think. Each person is different and needs to process our grief differently.

Our family remains close. We were close before this, and even closer after it. We are relying on each other to get through this. Having someone taken violently from you changes a piece of you. My family is all experiencing this together and there is a certain comfort in knowing you are not alone in how you are processing the grief. Each day, the pain is a little less but the hole still remains in our hearts. All that remains are our memories of James.

RIP - J.A.K
October 14, 1990 - October 4, 2010

Thursday, August 26, 2010

Passion and Fire on the Ice

How great is it to say you’ve been in love for 30 years?  How many people can honestly say that they’ve been passionate about something for 30 years or more?  I count myself lucky to have found true passion just shy of 3 years old.  While I don’t remember how I felt the first time I was introduced to ice skating, I know how I feel every time I set foot on the ice for practice or competition.  I’ve heard the stories from my grandparents and parents about the first time I saw an ice rink and people skating; it was love at first sight, according to legend, and I was insistent on ice-skating, unrelenting in my requests to try it out until my parents acquiesced. 

These days, people don’t follow their passions nearly enough.  We rationalize our decisions, often sacrificing following our passions and dreams by choosing what we feel is the more responsible choice or by doing what others expect us to do.  But, does the responsible choice make you happy?  If you answer with something along the lines that you’ll learn to like it, or it won’t seem so bad the longer you do it, you’re only fooling yourself.  Over time, you change and lose sight of the person you once were.  Rarely, it’s for the better; often it’s for the worse.  Everyone needs to do at least one thing they are passionate about.  You need to indulge yourself in that one thing, whether it’s a hobby, job, or activity.

I took a break from my passion for the past 5 years; although not intentional nor planned.  It just 'happened' when I moved to Seattle.  But looking at who I am today, I miss the person I was when I was skating.  It’s indescribable.  Friends even notice that I’ve changed, but can’t pinpoint exactly how I’ve changed.  There’s a certain feeling you have when you do what you love.  Putting that feeling into words doesn’t work; nothing comes close to the emotions you feel when you follow your heart.  Even your worst day is still better most people’s best days.  And that feeling translates into all aspects of your life.  It’s subtle and you may not even realize you’ve changed as person, but you have.   My best friend knows just by talking with me on the phone when I’ve been skating and when I’ve been off the ice for an extended period of time.
 
After a 5 year competitive hiatus, I lace up the skates again next week.  Just thinking about getting back out there gives me a sense of excitement and nervousness.  But the smell of the ice and sound of my blades cutting through the cold, smooth, glass-like surface will welcome me back like it does every time and everything will be right with the world.  And more importantly, everything will be right with me.  What amazes me the most is the passion and fire I feel on the ice, as strong as it was 30 years earlier.  Not a lot of people can say they still do what they loved doing when they were 3 or 4.

Friday, July 30, 2010

Lesson 2: Someone to Believe In

Everyone likes to be "believed in".  What does it mean to believe in someone or to have someone believe in you?  People try to explain it by describing it as trust, support, and faith.  Merriam-Webster defines it as "to have a firm conviction as to the goodness, efficacy, or ability of something".  Belief is an elusive concept; one that is not easy to explain.  If it's not easy to explain, how can it be taught?  None of the words used to describe or define it are concrete or demonstrative.  In essence, belief is an abstract concept, yet ask a person why they think a person was important to them and chances are you get the response, "Because they believed in me."

Believing in others is more than just telling someone you believe in them and more than doing something nice for them.  It's a combination of actions, thoughts, and feelings.  How do you interact with that individual?  Do you lend a helping hand, listen to their troubles, ask questions, allow them to grow and develop on their own?  Are you sincere and humble in your interactions with them?  Do you stick with that person through the good times and bad times?

Cheryl exemplified what it is to "believe in" someone.  She embodied all of the traits I mention above and more!  Cheryl was the head of the PE department at college and also the head coach of the local skating academy, and I know I'm not the only person who was blessed to have her in my life.  She was just an awesome person to know and became a good friend of mine throughout the years.  Cheryl is someone whom I try to emulate, but fall drastically short.  I learned many things from her and accomplished a lot with her help, but her guidance was very subtle and discreet.  She let me make my own mistakes and never chastised me for my decisions. 

I couldn't have accomplished what I did alone, or without her believing in me.  She was patient when I made mistakes, allowing me to come to her instead of approaching me first.  She listened when I needed someone to talk to.  Some times she offered advice, other times she just let me talk.  Cheryl had a way of leading people to the correct answers on their own.  She made sure I had food to eat.  Being a poor college student, working my way through school, there were times I didn't eat right;  either I didn't have the time between classes and work, or more frequently, I didn't have the money to eat more than ramen noodles for months on end.  (Hell, I didn't even have money for Quarters at Uphill 41 were beer was 25 cents on Thursdays!)  Periodically, Cheryl would have me over for dinner or invite me out to eat to discuss coaching or the skating team.  It was her way of making sure I was getting a good meal once in awhile.

After I graduated, we kept in touch and I visited a few times before she succumbed to cancer.  She was upbeat and positive, always asking me about what was going on in my life.  On my last visit with her, we had brunch at Kaleva Cafe.  I'll never forget our conversation or what she shared with me that day.  She shared her first impression of me when we first met and told me how proud she was of what I had become.  (Her first thought when meeting me was, "Oh Dear!")  After some laughs and reminiscing about mistakes I made along the way, I told her I couldn't have done it without her help.  Cheryl just smiled and told me, "I didn't do anything.  It was how you handled each opportunity that made you successful."

That one statement, so simple, combined with her current expression and past actions, told me that she believed in me.  She was humble in the part she played. She created those opportunities for me, but never took the credit for them.  Cheryl provided guidance when I asked, never making me feel bad or unsuccessful for acknowledging I needed help.  Under her tutelage, I became a head coach of another local skating club and the assistant director of another,  earning my Professional Skater's Association coaching certification in Free Skating, Synchronized Skating, Power Hockey, and Sports Medicine & Nutrition.  She and I also formed a collegiate skating team, which placed 7th at Nationals two years after it was started! 

I'll never know what made her take a chance on a little punk with her head half shaved and the remaining hair colored pink, green, teal, black, and flame red.  But all her actions, support, help, and guidance throughout the years tells me she believed in me from the start.  Yet, the memories and examples still don't provide an accurate definition of believing in someone. 

To build on Merriam-Websters' definition of belief in someone:  to have a firm conviction as to the ability of someone which is supported by actions, words, and sentiments occurring over a duration of time.   But it still doesn't provide a tangible definition and is open to subjectivity.  If you can't concretely explain it, how can you teach it?  Believing in someone is a concept you can only teach by example through a combination of words and actions, but it's a demonstration that takes time.  These days, it's hard to find someone willing to invest time in another person.

Tuesday, July 27, 2010

Lesson 1: How a car teaches many lessons

Recently, I was thinking about my father and everything I learned from him.  Some of it he intentionally taught me, while other items I learned were through circumstance.  The easy items to write about are the skills he taught.  My father believed that his little girl should be able to take care of herself.  So began the intentional lessons and learnings. 

One of the items he believed strongly in was car maintenance.  From an early age, evenings and weekends were spent in the garage with him learning about cars; changing the oil, replacing brake pads, troubleshooting various noises and sounds, replacing CV joints (CV stands for continuous velocity in case anyone was wondering), and all sorts of other things he enjoyed tinkering with.

Of course, these were all items I hated doing growing up.  Really, why was I being punished by doing all this stuff?  My cousin was interested in learning about cars, so why wasn't he over here helping my dad?  (My cousin, by the way, learned all he could from dad and now owns a great body shop!)  But a strange thing happened as I got older, moved away to college, and bought my first car.  I ended up relying on those skills to keep a little beat up Sable I bought for $150 running.  And that Sable lent it's engine and transmission to a Taurus I bought for $200.  I think I invested about $500-$600 at the MOST into my car.  I remember weekends in the school parking lot or at the Wheeler House (MTU's 4X4 club where many members lived and tools and advice were readily available) replacing the axle, doing the brakes, replacing the starter, and other necessary items.  The biggest undertaking was swapping the engine and transmission from one car to the other.  And all of this was accomplished because my father forced me to work with him in the backyard as I was growing up.  To be fair, I did have a lot of guys willing to help me at school, but they taught me how to do the tasks I didn't know how to do rather than do it for me.  Cars and mechanics didn't intimidate me after having grown up around a backyard mechanic and I was eager to learn from a hot guy at school.  Funny how hormones can help change a person's attitude about learning!

But the story continues...I moved to Cleveland (3 hours from my family versus 10 hours at school) for a job.  It was my father's first time seeing my car after hearing about all the work I had put into it.  Amazingly enough, he didn't mention all the times I argued that I shouldn't be helping him fix one of our cars while growing up.  He had a look of pride in his eyes and just said, in normal dad fashion, "Not bad for what you've got invested in it.  Hell, you've already had it for a year and been able to drive it for 550 miles a stretch without breaking down, so I'd say you found a good investment."

A few weeks after that exchange, I was visiting again and knew it was time to replace the power steering pump.  What was supposed to be a quick job ended up lasting several days longer due to a funeral.  What started as me working on the car, with some assistance from my little brother (it was my time to teach him!), ended up in an large argument with my father.  He wanted to help me and thought I still had stuff to learn.  Plus, he just wanted to do what he loved doing with his baby girl and bond over their experience.  Me, being the strong independent female he taught me to be, didn't want help.  I could do this on my own, and I'd done a lot more complex repairs on my own!  So we argued and argued, finally both going off in different directions without saying a word.  Him to the house, me back to Cleveland.  As I was leaving my mother tried to get me to talk to my father.  She explained that he was only trying to help and wanted to spend time with me.

And my next lesson learned around my first car was an unintentional learning from my father.  I got a phone call the next day from my mother.  All she would tell me was that my aunt and uncle were on their way to pick me up and I had to come home immediately.  I knew right then that my father was gone.  He had passed away.  It was ironic because at the time of death, I was thinking I needed to call him and explain why I didn't want his involvement the day before.  He had always told me never to leave someone while you are upset or angry words were exchanged.  That evening, I realized he was right.  I never got a chance to tell him why I didn't want his help with my car.  It wasn't because I didn't love him, want his help, or want to be around him.  It's because I wanted to show him this skill he taught me over the years - how to take care of my car.  I wanted him to see that his baby girl was grown up and could take care of herself and he didn't have anything to worry about.  But I never got that chance.  And I learned the hard way to never leave someone while you are angry.  And all of this is tied to a single car (well, two that combined to make one).

A few months later, I sold that car and bought a brand new one.  I let 12 years go by without working  on a car.  Just the other weekend, I was helping a friend with some car 'stuff', and realized I missed wrenching on cars.  Spending time with friends (or family), complaining about the design and how you would have done it differently, and just general BS'ing with one another are all aspects of working on a car.  It's much more than solely solving a mechanical problem.  Some of my favorite memories among friends involve car maintenance.

And then, I started remembering all the things my father taught me that I never got a chance to thank him for; things he wanted me to learn and actively taught me as well as items he taught me by example.  And the things he taught by example - they are the truly important things I've forgotten over the past few years, but am slowly starting to remember.  Funny how a car can teach us so many lessons...

Monday, July 26, 2010

Intro: Lessons of Love

This blog began as a requirement for a course I took in pursuit of my Masters in Instructional Design & Technology, hence the earlier learning theory posts.  But, just the other day, I was thinking about all the other ways we learn aside from formal education; how we learn, who we learn from, and what learning shapes us into the individuals we are today.  A lot of who we are as adults is shaped through our experiences when we were younger.  Most of the time, we don't even recognize the skills and traits we are being taught or even appreciate them until it is much too late to thank our instructors.

As I turn another year older this week, I began reminiscing about my father and all he taught me during our time together.  Honestly, I didn't realize the impact he had on me until now, 13 years after he passed away.  And there are others, too, who I might not have known very well or remember their names, but who have had a huge impact on who I've become.  The sad thing is, I lost the person I once was and everything I once knew and am just now letting this person re-emerge. 

Over the following weeks, I hope to post snippets about each of the lessons I learned throughout the years from all the wonderful individuals who taught me skills, ethics, leadership, and values that I learned along the way.  Some of these items are not things someone can hand you a book or lecture you on.  The learning occurs through constructivism, sometimes social, most of the time individual, but is a combination of cognitive development and social context. 

Some posts will be short, others may ramble, but the link to them all is love.  Think about what values you would like to live by and how you share those with others as you read the posts to follow.  How would you demonstrate to your children or family the importance of loyalty, family, great friends, compassion, empathy, leadership, pursuing your dreams, and the value of hard work?

Friday, March 19, 2010

Learner & Contextual Analysis

In summary,  leaner and contextual analysis is useful identifying your audience needs in creating instructional material. Morrison, Ross and Kemp (2007) state that, “To serve either a training group or an academic classroom, the instructional designer must obtain information about the capabilities, needs, and interests of the learners.” Some of the learner characteristics the book covers include: general characteristics, specific entry, learning styles, personal and social characteristics, culturally diverse learners, and learners with disabilities. Topics covered related to contextual analysis include: orienting, instruction, transfer, and performing a contextual analysis. The following are highlights of the aforementioned topics on learner and contextual analysis.

Morrison, Ross and Kemp (2007) defer to Heinrich, Molenda, Russell, and Smaldino (1999) and state that designers should begin with the following categories when describing learner characteristics: general characteristics, specific entry, and learning styles. General characteristics are defined as broad, generalized statements about the learners, such as gender, ethnicity, work experience, and education. Specific entry characteristics are skills or knowledge that the learners must have prior to being exposed to the new training. For example, if you are going to offer a computer-based or on-line training class, a perquisite may be ensuring the learner has access to a computer and is comfortable using the internet and basic word processing skills, such as those found in MS Word. The last category Heinrich et al. (1999) mention is learning style. Morrison, Ross, and Kemp (2007) surmise that knowing learning styles is more important if you are providing one-on-one or small group instruction. Other learner characteristics discussed by Morrison, Ross and Kemp include: academic information, personal and social characteristics, cultural diversity of learners, and learners with disabilities.

Lastly, as a designer, the context to deliver the instruction is important to understand. There are three contexts a designer needs to consider: orienting, instructional, and transfer. Orienting context includes understanding what the learner brings with them, such as skills, knowledge, and attitude. Orienting also includes knowing if the learners feel that the course will be useful to them and how or why the learner feels accountable to learning the material. Instructional context a designer should consider includes method to present the materials and factors in the environment to support the delivery method. Some key environmental factors to consider are: lighting, noise, temperature, seating, accommodations, equipment, and transportation. The last type of context is transfer. Context transfer focuses on “creating an environment that promotes the application of the newly learned knowledge and skills” (Morrison, Ross, and Kemp, 2007). In conducting a contextual analysis, surveys, observations, and interviews may be necessary to gather information necessary to analyze.

All in all,  chapter 3 in Designing Effective Instruction includes a great breakdown of items to consider when defining the target learner and context. Much information is easily available regarding potential learners, although not all of the information may be required to begin design on an instructional module. By considering the individuals’ backgrounds and experiences, and the context of the material and environment, a designer can be off to a terrific start in creating meaningful instruction.

Morrison, G. R., Ross, S. M., & Kemp, J. E. (2007). Designing effective instruction (5th ed.). San Francisco: John Wiley and Sons, Inc.

Heinrich, R., Molenda, M., Russell, J., & Smaldino, S. (1999). Instructional media and technologies for learning (6th ed). Englewood Cliffs, NJ: Prentice Hall.

Wednesday, March 10, 2010

Which Design Model to Use?

A new instructional designer can be faced with a dilemma of which instructional design model should I use.  This entry focuses on the differences and similarities of ADDIE and MRK.  ADDIE is the acronym for Analyze, Design, Develop, Implement, Evaluate, while MRK stands for the model put forth my Morrison, Ross, and Kemp.

Sunday, February 28, 2010

Learning Summary

People learn for various reasons and can be motivated by many stimuli.  Just take a look at the various research and theories that exist out there to try to explain learning:  behaviorism, cognitivism, connectionism, constructivism, and social learning to name a few.  I believe Ertmer and Newby’s (1993) statement that people learn by many different styles and theories is applicable to everyone.  There are many variables that come into play with learning:  is it a new topic, what is the previous knowledge of a subject, which intelligence subset does it connect with, why is the individual interested, how does the individual plan to apply the information, and the list of variables goes on.  The one striking item I found in my study of learning theories is how closely everything is related and most of the theories stem from a single social science, cognitive psychology (Ormrod, 2009).  While no single learning theory is sufficient to describe the population, or even an individual, the science as a whole is able to describe a majority of individuals learning experience within a moment of time.
If you think of learning styles, theories, motivations, and technologies as a house with a foundation, two support pillars, and a roof, motivation is the foundation, the pillar to the left is learning theory, the pillar to the right learning style, and the roof is technology use.  Without motivation, be it extrinsic or intrinsic, there will not be knowledge acquisition.  Motivation is the base upon which learning is built on.  The pillars providing strength are theory and style. The roof, technology, is an element that can enhance and better the learning experience but is most effectively applied once learning theories and styles are understood.
Throughout my studies, I’ve learned more information about my personal learning styles.  I’ve learned that I am more of a constructivist who likes to rely on connections to obtain more knowledge and information.  I also tend to elaborate and look for personal connections within new learnings.
As an instructional designer, it is important to know your preference for learning as well as understand the major learning theories and styles.  It is easy to get caught up in designing materials and courses that best suit your own style.  By knowing more about learning, it can help you view the material through another lens and connect with more students who may prefer other learning styles.  The one most important item I learned throughout my studies is the power of ARCS.  Instructional designers should be able to look at their curriculum and assess the material and teaching methods for:  Attention, Relevance, Confidence, and Satisfaction (Keller, 1999).

References
Ertmer, P. A., & Newby, T. J. (1993). Behaviorism, cognitivism, constructivism: Comparing critical features from an instructional design perspective. Performance Improvement Quarterly, 6(4), 50–71.

Keller, J. M. (1999). Using the ARCS motivational process in computer-based instruction and distance education. New Directions for Teaching and Learning (78).

Ormrod, J., Schunk, D., & Gredler, M. (2009). Learning theories and instruction (Laureate custom edition). New York: Pearson.

Sunday, February 21, 2010

Week 7 - Reflection of my Learning Styles

I was once asked what I thought my learning style was.  My response was that I preferred a constructivist style of learning.  Of course, I also remarked that it was hard to limit one's self to a single learning style, as Ertmer and Newby (1993) pointed out in one of their articles.  Now that my education in various learning styles is coming to a close, I was asked to revisit the questions of: what is my personal learning style, how has it changed, what can further explain my learning preferences, and what role does technology play in my quest for information.

The Six Sigma Master Blackbelt and Lean Sensei typical response is:  "It depends".  My answers depend on a variety of contexts:  what is it I am learning, why am I learning it, where am I learning, etc., etc.  Because I feel learning is unique and personal to each individual and the environment occurring in, my answers regarding personal learning styles may change slightly.  

I believe it is still hard to limit one's self to a single style of learning.  Upon learning more about various styles of learning, I still believe that my preferred style is constructivist but there is also a lot of connectivism in there.  Of course, connectivism as a learning theory versus learning method is highly debatable.  If you also throw in adult learning, which is broad and vast, I fit that definition as well.  For starters, like most adults, I have to be motivated and have a need or desire to learn.  From there, my preference is to apply or construct my current knowledge to fit the application.  Many times I look to my learning networks (aka connectivism) to provide clarification or advanced examples of principles.  I don't believe my initial response was incorrect or changed over time, but is supplemented with other methods such as connectivism.

Technology plays a large role in my quest for knowledge.  The internet, and all of it's glorious connections via blogs, wikis, learning groups, newsletters, and more, helps me learn more about concepts and how to apply them.  It seems like I am always "googling" something I want more information on at least once a day.  Some of the information is work related, some school, and other is purely personal.  This network helps me acquire information as well as share information with others.  More and more companies are moving towards internal wikis and SharePoint sites to help share information.  I use both of them frequently to further my learning at work.

As I come to a close in this entry, I feel I have gained a better understanding of my learning preferences, even though my thought has not drastically changed.  Technology plays a large part in how I obtain knowledge.  Without technology, I doubt I would have been able to learn as much as quickly as I have over the years.

References

Ertmer, P. A., & Newby, T. J. (1993). Behaviorism, cognitivism, constructivism: Comparing critical features from an instructional design perspective. Performance Improvement Quarterly, 6(4), 50–71.  
 
Davis, C, Edmunds, E, & Kelly-Bateman, V. (2008). Connectivism. In M. Orey (Ed.), Emerging perspectives on learning, teaching, and technology. Retrieved February 2, 2010 from http://projects.coe.uga.edu/epltt/  

Ormrod, J., Schunk, D. & Gredler, M. (2009). Learning theories and instruction (Laureate  custom  edition). New York: Pearson.

Thursday, February 4, 2010

Connectivism - Week 5

Connectivism:  is it a theory to be included with learning theories such as behaviorism, constructivism, cognitivism, and others, or is it just a way people inherently learn?  George Siemens and Bill Kerr have opposing viewpoints regarding if it is a theory or a pedagogical view (Davis, 2008). 

Vygotsky’s constructivist theory relies heavily on the Zone of Proximal Development (ZPD) (Ormrod, 2009), which is important for connectivism to be meaningful.  If an individual has a basic understanding and aptitude, their various social interactions and learning interactions will assist them at being successful in their quest for knowledge.  For example, if I were to perform a transmission rebuild for my car, I would use my learning network to gather information and various perspectives and lessons learned from others.  By using the internet to look at blogs and instructions, purchasing a Chilton’s manual, talking to family and friends who have performed this task before, and relying on my mechanical engineering degree, I would be successful in my endeavor.  However, if I wanted to perform a hip replacement, no amount of research or searching with my learning network will help make me successful.  I simply lack the prerequisite knowledge and understanding in the medical field, whereas the transmission rebuild is similar to my mechanical background.

By studying my personal learning network, as observed in the .jpeg image, I agree with Kerr that connectivism is not a learning theory (Davis, 2008), especially when applied in the above context.  While I may not believe it is a theory, I do feel that connectivism is important to learning and can help an individual grow and develop their skills providing there is a foundation to start with.   Typically, learning networks further knowledge or provide a basic understanding of a concept.

Overtime, my learning network has become more “e”-centric:  electronic focused.  I know I’m not alone when I google a term to find out more information, learn different applications of a principle, or browse the internet searching for differing viewpoints on a subject.  But a majority of my internet research is done on subjects I am already familiar with, which supports my belief that connectivism is not a learning theory, but a learning tool.  Rarely do I use the internet to learn a brand new tool or concept.  That specific learning is still done face-to-face, with through the classroom or through a co-worker or subject matter expert, depending on the subject and location.  As my learning network has grown and evolved through the use of technology over the years, there are specific paths I prefer to take depending on whether I am refining my knowledge base or learning something completely new.  

A great blog I came across during my research, and portrays my sentiments about behaviorism (instructivism), constructivism, and connectivism, is authored by Ryan Tracey.  I recommend taking a look at it:  http://ryan2point0.wordpress.com/2009/03/17/instructivism-constructivism-or-connectivism/.  While I didn't reference his blog in this assignment, I  feel he has captured my sentiments on this topic very well and is worth reading.

References
Davis, C, Edmunds, E, & Kelly-Bateman, V. (2008). Connectivism. In M. Orey (Ed.), Emerging perspectives on learning, teaching, and technology. Retrieved February 2, 2010 from http://projects.coe.uga.edu/epltt/ 

Ormrod, J., Schunk, D. & Gredler, M. (2009). Learning theories and instruction (Laureate  custom  edition). New York: Pearson.


Click on the image below to see my learning network and ways I obtain various knowledge.  (Created with Text2Mindmap:  http://www.text2mindmap.com/)





Sunday, January 17, 2010

Week 2: Learning Theories and Math

Have you ever wondered why some people have the uncanny ability to spit out numbers they've just heard once, or perform simple math operations in their head within record time?  Were they born with a special aptitude, do they learn (process information) differently, or were they taught by different teaching methods?  Recent research in how people learn numbers and math purport that those viewed to succeed in the above areas exhibit the ability to dual code; i.e. the ability to associate numbers with words and images (Bell, 2003).  Much of the information presented below comes from articles and research posted on two websites:  LD OnLine and Ohio State's Ed Laughbaum. 

Gersten and Chard, in their article "Number Sense:  Rethinking Arithmetic Instruction for Students with Mathematical Disabilities" (2001) state that research from neuropsychologists and cognitive psychologists agree that disabilities in math include three items:  high frequency of procedural errors, difficulty in retrieval of arithmetic facts, and inability to symbolically represent or code numerical information for storage in the brain. Looking back to the way I was taught basic mathematics, the methods used were primarily memorization and recitation.  I recall being graded on how many problems I could solve in 60 seconds, which emphasized memorization of the addition and multiplication tables.  This turned basic math into declarative knowledge, which researchers agree that the retrieval of declarative knowledge is often slow and conscious (Ormrod, 2009). This sentiment is echoed in both Gersten & Chard's work as well as Bell’s work.

After all these years, why is the memorization and recitation method in math now being proved as not adequate?  I do not have an answer for that, except that the brain and learning theories is still an emerging topic.  What we know now is that for humans to place items into long-term memory AND be able to recall it quickly, we need to create connections to words, sounds, experiences, and emotions (Ormrod, 2009).  Laughbaum (2010) posits this theory by stating, "Teachers must create connections to improve the memory of mathematics taught."  He goes on to explain that processes need to be connected by relationships to personal experiences and emotions.  The more connections, or associations, you have to the data, the easier it becomes to recall, even if you don't have all the data upfront.   

If you agree with the current research and theories, what remains is to establish is the best way to teach math to create the most connections possible.  Laughbaum has done extensive research on this topic and has information available on his website: http://www.math.ohio-state.edu/~elaughba/ .  He has several presentations and published papers on his site that explain methods used to help retain math data and procedures, including pattern building, generalization, and technology such as software.  What is important to note is the order he recommends using the methods.  He generally recommends letting students generalize and formulate their own processes and procedures before demonstrating a preferred method to students (Laughbaum, 2008). 

For me, drilling basic math through memorization wasn’t the most effective, in part because I am a very visual and relational type of person.  Current research in the field recommends associating words, colors, patterns, and experiences to numbers, which is something I was never taught and never formulated on my own.  Did it hold me back in school or my profession?  Not at all!  Could it have the potential to hold others back?  I believe so, since those who may be slow to recall math information may be incorrectly labeled as “slow” and lacking understanding to move on to higher forms of math.  Can being slower to recall basic math operations help create test anxiety, causing students to “blank out” during exams and being incorrectly labeled?  You bet, and research by Higbee (1999) validates this theory by correlating the time to recall information with test anxiety.  
 
The authors, researchers, and websites cited in this article are making valuable contributions to the world of information processing and retention in a often overlooked discipline - math.  As an instructional designer, whether within education or corporate training, the theories and methods presented will help you create and present material that will be retained long after the students have left your class.  LD OnLine (http://www.ldonline.org/) has a wealth of information on how learning theories relate to memory retention, especially for those with learning disabilities.  For more information on how the brain processes and retains math, Laughbaum has an extensive work published on his website at http://www.math.ohio-state.edu/~elaughba/.   

I’d like to open this blog to readers to share experiences of how they learned or teach math; what methods work and which didn’t? How do you form connections to be able to recall the information later? How does research in cognitive factors help or change the way math is being taught?


References


Bell, N. and Tuley, K. (2003). Imagery:  The sensory-cognitive connection for math.  Retrieved January 16, 2010 from: http://www.ldonline.org/article/Imagery%3A_The_Sensory-Cognitive_Connection_for_Math


Gersten, R. and Chard, D. (2001).  Number sense: Rethinking arithmetic instruction for students with mathematical disabilities.  Retrieved January 16, 2010 from: http://www.ldonline.org/article/5838


Higbee, J. & Thomas, P. (1999).  Affective and cognitive factors related to mathematics achievement.  Journal of Developmental Education, 23(1), 8.  Retrieved January 16, 2010 from Education Research Complete Database.  Permalink: http://ezp.waldenulibrary.org/login?url=http://search.ebscohost.com/login.aspx?direct=true&db=aph&AN=2256674&site=ehost-live&scope=site


Laughbaum, E.D.  (2010).  The neuroscience of connections, generalizations, visualizations, and meaning.  Retrieved January 16, 2010 from: http://www.math.ohio-state.edu/~elaughba/


Laughbaum, E.D.  (2009).  Generalizing patterns in algebra for long-term memory understanding.  California Math Council, ComMuniCator, (34, 2), December, 2009.   Retrieved January 16, 2010 from: http://www.math.ohio-state.edu/~elaughba/


Laughbaum, E.D. (2008).  Implications of neuroscientific research on teaching algebra, Int. J.
            Continuing Engineering Education and Life-Long Learning, Vol. 18, Nos. 5/6,
            pp.585–597.   Retrieved January 16, 2010 from: http://www.math.ohio-state.edu/~elaughba/ 


Ormrod, J., Schunk, D. & Gredler, M. (2009). Learning theories and instruction (Laureate  custom  edition). New York: Pearson.